Are you interested in REQUESTS? Save with our coupons on WHATSAPP o TELEGRAM!

[GUIDE] Return to Stock Stable on Xiaomi Redmi Notes 3

January 21 2016

Many have not appreciated the presence of a custom Rom on their terminal creating a bit of discomfort? The staff of Smartylife is here to help you! With this guide we are going to restore it Xiaomi Note 3 Redmire just like “mom did it”. This guide you can perform it practically everyone, both the less experienced but also those who have the bootloader blocked, or who has managed to brick him somehow.

Topics of this article:

How to Reset Xiaomi Redmi Note 3 to Factory Conditions!

Requirements

Xiaomi Redmi Note 3 with 50-60% battery (Recommended);
Tool and Driver: Download (Required);
ROM Stable: Download (Required);
USB Debug Enabled

STEP THROUGH THE SUBSEQUENT GUIDE

Unpack the archive "Tool and Driver" on desktop.
Open the folder "Driver_Auto_Installer_v1.1236.00" and run the file install.bat o Install.
Also delete the folder because it will no longer be needed. Now, unpack it Rom Stable previously downloaded. First unzip the folder with extension .tgz, once you do this step you will find another folder with extension .tar, which you will need to unpack. Finally you will end up with this screen:
In the "images ", move the file "MT6795_Android_scatter.txt" in the folder "Signed_bin".
Open the folder "SP_Flash_Tool_exe_Windows_v5.1516.00" (first extracted from "Tool of Driver "), and run the file as administrator "Flash_tool.exe", you will most likely get a Pop up, ignore it simply by pressing OK.
Press the key Download Agent and select the file "DA_SWSEC.bin".
Click on the button "Scatter-Loading" and select the file "MT6795_Android_scatter.txt". This is what will appear when the file is loaded scatter.

IF A CUSTOM ROM (SUCH AS THE SPHINIX) IS INSTALLED INSIDE THE TERMINAL, YOU MUST REMOVE THE "PRELOADER" CHECK THAT YOU FIND AS THE FIRST ITEM OF THE LIST

8. Press the "Download " that you find up, and turn off the device.9. Wait for the device to shut down completely, and connect to the computer while holding down the button Volume - (the one to lower the volume), very important is to hold the key down until the red bar at the bottom becomes Purple / Yellow.
10. Once the process is complete, this screen will appear. To restart the terminal, unplug the cable USB and hold down the key POWER (APower On).