Are you interested in REQUESTS? Save with our coupons on WHATSAPP o TELEGRAM!

[GUIDE] Multilanguage and unlock bootloader on Xiaomi Redmi Notes 3!

January 15 2016

The name of the ROM Android which you find on your devices Xiaomi it takes its name MIUI. If you have purchased from Smartylife lo Xiaomi Note 3 Redmire a few days after its release, most likely you do not have firmware with the Italian language. Basic the Miui only English and Chinese.

Topics of this article:

With the procedure we are going to report below you can get a full English translation through the installation of the MIUI ROM Multilanguage you will not even need to resort to manual installation of the Play Store as you will find it already pre-installed on your system once the installation procedure is complete. Also, you need to know that every Friday is released a new version of the operating system.

Install multilanguage with integrated Italian for Xiaomi Redmi Notes 3

By driving the terminal does not lose the Smartylife warranty, moreover, all the staff are exempt from any damage caused to the terminal in question!

The guide is not easy, but it's enough to do the following:

Requirements

Xiaomi Redmi Note 3 with 50-60% battery (Recommended);
Xiaomi Usb drivers (Optional);
Xiaomi Redmi Tool Notes 3 for Recovery: Download (Required)
Bootloader Unlocking Tool MiFlashUnlock (kindly translated by Miui.it): Download (Required);
Multilingual Xiaomi Redmi Note 3: Download (Required);
Developer for Xiaomi Redmi Notes 3: Download (Required).

How to download the Developer from en.miui.com

Click on "Download Full Rom" found online at "Developer ROM"

Request authorization to unlock bootloader | First step

First, you need to request the code at Xiaomi for the release of the bootloader. All is simple. Just go up this site, where there is a “button” under the computer and phone icon, then press it.
Once this is done, just log into your account Xiaomi using the email or mobile number accompanied by the prefix “+39"(Must be the same account attached to Xiaomi Redmi Note 3 to unlock). * Here is the code request form!

* Once "logged in" SE you will be presented with a sort of forum, close the tab and reopen the site linked above. Then just click "on the button" again to get to the long-awaited application form.
In the first field, you must write your name that is linked to your account Xiaomi (without entering the last name).
Instead, in the second field you have to select the Italian prefix "+39".
This is done in the penultimate field and you will need to add your cell phone number to your account Xiaomi.
Finally, in the last field, Xiaomi it requires us to describe the reasons for the request. Well, since most probably do not understand Italian we have to write it in Chinese, so copy and paste this "simple" script: 嗨你好我想解锁我的设备因为我喜欢小米手机想个性化我的手机谢谢 (make sure you do not there are spaces between one letter and the other).
As a last thing, check the box below all the fields where you declare that you accept. Good! Now a nice click on the green button to confirm the request!

AFTER RECEIVING THE CODE BY SMS FROM XIAOM TO UNLOCK THE BOOTLADER, PROCEDURE WITH THE SECOND PASSAGE

Developer Installation | Second step

Connect your phone to Desktop via cable USB. Move the file ZIP of Developer in the phone's internal memory, without putting it in a folder and without unpacking it and without renaming it.
Go to the application "Updater" which you will find pre-installed inside the terminal. Press at the top right where a button formed by a circle and three dots is positioned (as in the photo), then all that remains is to press on "Choose update package".
In turn, a list of folders will open, scroll down and press on the file developer previously copied in device. Now just wait for the end of the process with the restart of the device (the data inside the terminal will be erased with the installer's installation). Make the configuration step by step and finally create or log in to your account Xiaomi which will serve for the second pass.
Go to this site where you will need to access your account Xiaomi to make sure that your own Redmi Note 3 is linked to the account. Then press on the writing "Sign in with My Account", and finally, enter your credentials for access to your account Xiaomi (When you enter if you find the icons with the padlock, press the key "Sign in" to check the account where they will send you a sms with a code to insert.). Now all connected!

Use bootloader unlock tool | Third step

First you need to download the tool MiFlashUnlock (the download link is above). Once downloaded the file zip of the tool, you need to unpack it. If you use it 7zip you can refer to the images below, otherwise according to your manager Archives proceed.
Once you have completed the process you will find a folder, open it. Now, just start the file .exe of the tool you will find with an orange icon.
First, after starting the tool for the release of the bootloader, you will have to accept the conditions. Once this is done, you will be asked to enter your credentials to access the account Xiaomi (remember to enter the prefix +39 to validate).
At this point we move on to the phone, where you will have to enter FASTBOOT. To do this, just turn off the terminal and press the button Volume - (the key to decrease the volume) at the same time as the key POWER (the one to turn on the device), connect the cable to the phone again, and continue to hold down the keys until the message appears on the screen FASTBOOT, it usually takes about fifteen seconds to boot into this mentioned mode poco does.
Now let's go back to the tool MiFlashUnlock where we previously accessed your account Xiaomi. You will certainly notice a change of the screen, where once you have connected it Xiaomi Redmi Note 3 in Fastboot, the writing will come out "Connected phone" on the tool. Now there is nothing left to click on the button "Unlock"!
Wait for the operation to complete and restart the terminal. Done! Bootloader unlocked!

Install Custom Recovery | Fourth step

Before proceeding, download both files that we have placed on it. Done? Perfect, what you have to do now, is to move the Rom Multilanguage, inside the device.
Then connect the phone by cable USB to the computer, open the exploration resources of Windows and then open the device with the name "Redmi Note3". Once pressed on the peripheral, drag the file into the “Phone storage” or “Phone memory” Rom Multilanguage.
When the shift is over, switch off the device and disconnect the cable USB from the phone. Now hold down the key Volume - (key to lower the volume) simultaneously with the key POWER (the one to turn on the device), connect the cable to the phone again, and continue to hold down the keys until the message appears on the screen FASTBOOT, it usually takes about fifteen seconds to boot into this mentioned mode poco does.
Now, take the file with the tool to install the custom recovery, and unzip the file ZIP on your desktop. If you do not WinRAR, you can use the Windows Explorer which will allow you to open the file ZIP.
Now, open the folder containing the tool and start the file "SmartyTool By Manuel Bianco"And follow the on-screen instructions.
* For those who did not understand how the tool works: press the button 1 on the keyboard and then ENTER.
You will see the word "TWRP INSTALLED ", then unplug the device, and close the mini tool.

Install multilanguage official Fifth passage

CAUTION!!!

THIS PASSAGE TO CERTAIN USERS FROM PROBLEMS, SO IF YOU DO NOT SEE THIS SCENERY TO RECOVERY YOUR PHONE IN RECOVERY MODE, YOU SHOULD FOLLOW TO NEW 5 STEPPING FOURTH PASSAGE.

To restart in mode Recovery, press the key simultaneously Switching and Volume + button (Key to increase the volume), until the writing appears "ME". The start of the Recovery it's pretty slow, but in thirty seconds it should start.
Proceed by doing a Factory Reset. Press on the second item "Wipe", and do one Swipe of the red dot (from left to right).
When you see it at the top: Factory Reset Complete "SUCCESSFULL", you can press on the triangle-shaped arrow at the bottom which is used to return to the Main menu.
Perfect, now the last step is missing. Press on the first item "install". Scroll all the way through the phone files and you will find a file called "Xiaomi.eu_multi_hennessy_6.1.11_v7-5.0.zip", premetelo!
So wait for the end of the operation, it will take a few moments. After the operation, you should have this screen.
Last thing!!! Tap on the "Reboot System". Then wait for the terminal to reboot, it will take a few minutes. Now you can enjoy the Italian language!